Gold901 is a lightweight, easy to install, 200 psi rated water service tubing that can be used on both the municipal and private-side of a project. It's manufactured to Copper Tube Size (CTS) from High-Density Polyethylene (HDPE) and is third-party certified and listed to AWWA C901, CSA B137.1, and NSF 61.

Applications

• Water service tubing

Features

• Virtually immune to chemical attacks. Please refer to the IPEX Chemical Resistance Guide for specific c chemical suitability
• Resistant to corrosive soils, aggressive water, stray electrical currents and moist environments
• Lightweight - A 200 foot coil of 3/4” Gold901 weighs 20 lbs
• Brass or plastic compression fittings are readily available. A stainless steel insert or a specially designed (copper tube size) plastic insert must be used to reinforce Gold Stripe at the joint
• Sequential markings every 2 or 5 feet
• Superior Flow - Hazen Williams C-Factor = 150
• Expansion contraction rate of 1.4” per 100’ of pipe for every 10ºF change in temperature/22mm per 10m of pipe for every 10ºC change in temperature
• Rated at 200 psi @73ºF/Rated at 1380kPa @ 23ºC
• Virtually immune to chemical attacks. Please refer to the IPEX Chemical Resistance Guide for specific chemical suitability